Your iPhone has suddenly stopped charging, and you came here for a solution. Well, you are at the right place. You may have tried using another charging cable or pushing it at different angles. But if everything has failed, then you need to fix the iPhone charging port itself.
However, before you rush out for a replacement, you can try simple solutions that sometimes can work as a miracle. In this guide, we will walk you through how to fix your iPhone charging port safely, step by step, and when to consider a professional for this job.
Reasons Why Your iPhone Won’t Charge?
There are several reasons that can disturb your iPhone’s charging process. The most common is the dirt that enters the port when you put your phone in your pocket or bag. Those tiny particles do not let the cable make a connection to the device, and hence, your iPhone does not charge. Other times, it’s more serious, like:
- The lightning port is damaged.
- Internal pins are covered with moisture.
- The port’s solder joints have loosened.
Here, you need to figure out the type of problem before you attempt to fix the iPhone charging port. And for that, you can follow the below-mentioned step-by-step approach:
Step 1: Try a Different Cable or Charger
If you have been using the same cable, its pins may get damaged after long use. So, try using another cable. And if it still does not fix your iPhone charging, you can change the charger and power source to see if that changes anything.
Besides, you can reboot your iPhone because sometimes, due to software glitches, it impacts the basic functionality of your iPhone.
Step 2: Clean the Charging Port
If changing the power source and cable does not work, then you can now start inspecting the charging port. You can look inside by using a flashlight and try removing any visible dirt with a wooden or plastic toothpick.
One of the surveys reveals that about 4% to 6% iPhone charging issues are caused by debris in the port.
Once it’s clean, reinsert your charging cable. If it clicks in or starts charging again, then congratulations, you saved yourself a repair bill. But still, if cleaning is not able to fix the iPhone charging port, then you need to perform the next step.
Step 3: Check If the Port is Loose or Damaged
A loose iPhone charging port means the internal connectors have separated slightly from the board, and it only charges if you hold the cable at a certain angle.
At this point, a professional iPhone charging repair service is your safest move. iPhone ports are soldered onto the logic board, and repairing or replacing them requires micro-soldering skills and specialized tools.
Step 4: Check the Port for Moisture
Sometimes, charging stops because your iPhone’s port has moisture, which doesn’t allow it to establish the connection until you dry it.
At the same time, if your device has recently overheated, the iOS system temporarily disables charging until it cools down.
If you have tried the steps above but are unable to fix the iPhone charging port, it’s probably not a simple cleaning issue. At that stage, the best move is to bring it to a professional repair service. Certified technicians can test the port, measure voltage, and confirm what is the issue.
How Much Does It Cost to Fix an iPhone Charging Port?
On average, iPhone charging port repair costs around $80-$150, depending on your model and the damage type. Also, new iPhone models cost more as they have more compact internal circuits.
Can You Fix an iPhone Charging Port Yourself?
Yes and no, both can be answer here. If debris or lint is the only issue, cleaning it yourself can solve the problem. But if the port itself is physically loose, bent, or water-damaged, you need a professional to handle this. It is the same as hiring a professional laptop repair service because only an experienced person can handle the internal complexity of the device.
Besides, we always recommend leaving internal repairs to professionals with the right tools and ESD-safe workstations.
How to Tell If Your iPhone Charging Port Is Damaged
Here are a few things that you can look for and tell that the charging port is damaged:
- Your iPhone doesn’t charge at all.
- Charging only works if you hold the cable at a certain angle.
- The port looks burnt or visibly loose.
If you are facing any of these situations, you need to take your phone to a technician.
When to Call the Experts?
If your iPhone is not charging, and you have tried every DIY trick without luck, look for an expert service at this point. A professional expert diagnoses your iPhone, gives you a cost estimation for repair, and gets it charging again.
FAQs
How much does it cost to fix an iPhone charging port?
Most iPhone charging port repairs cost around $80-$150, depending on the type of damage and model.
Can you repair an iPhone charging port yourself?
Yes, cleaning the port fixes the issue sometimes. But if the port is physically damaged or the solder joints are loose, it requires professional repair.
How can I tell if my iPhone's charging port is damaged?
If the cable feels loose, or charging stops in the middle, or your phone fails to recognize the charger, your port is likely damaged.
Is it worth fixing an iPhone charging port?
Yes, because replacing the iPhone charging port is far cheaper than buying a new phone. And with proper professional repair treatment from iGadget Repair, your iPhone works with no issues at all.
Final Thought
A dead charging port does not mean a dead iPhone. Sometimes, it could be a lint inside the port, and other times, you need an experienced technician to look into the matter.
If your iPhone is not charging like it used to, skip the guesswork and call iGadget Repair today for your free repair quote, and let’s fix the iPhone charging port.
